Food safety knowledge and practices among raw meat handlers and the microbial content of raw meat sold at Kumasi Abattoir Butchery Shops in Kumasi, Ghana.

BACKGROUND: Foodborne diseases affect nearly 600 million people each year, that is, one in every ten people, and their outbreaks are most common in low- and middle-income countries, particularly in Africa. This study investigated the food safety practices among raw meat handlers and the microbial quality of the meat from the butchery shops in Kumasi Abattoir, Ghana. METHODS: This study employed a descriptive cross-sectional study and collected quantitative data on factors associated with food safety and hygienic practices among raw meat handlers and the microbial quality of the raw meat using a structured questionnaire and standard laboratory methods, respectively. The study used all 50 beef vending shops in the butchery for questionnaire aspect and fresh beef samples were obtained from 10 vendors in the butchery shop. Appropriate methods were followed to analyse questionnaire data and meat samples. RESULTS: Most of the butchers (72%) were between the ages of 31 and 45, and they were predominantly Muslims (68%). Most of the respondents (48%) had basic education. All the respondents had food safety certificates from the local authority but needed adequate knowledge of meat safety. Most respondents (90%) handled meat and money with the same bare hands, thus contaminating the meat. The study showed that the maximum Total Viable Count (TVC), Total Staphylococcus Count (TSC), and Total Escherichia coli Count (TEC) were 5.60, 4.39 and 5.13 cfu/g, respectively. The study also revealed that all the meat samples were Salmonella species-free. CONCLUSIONS: Microorganisms in raw beef indicate a public health hazard. It gives a signal of a possible occurrence of food-borne intoxication and infection if not controlled. Environmental health officers in the Greater Kumasi area should organize food safety training and educate raw meat handlers on the importance of food safety and its consequences.

[Key challenges in the dietary intake structure and cutting edge technologies for optimizing nutrition to protect the health of the Russian рopulation].

This article presents an analysis of some of the results of the work of the Federal Research Center for Nutrition and Biotechnology (Center) in recent years, highlighting the most important, promising areas of Nutrition Science and Food Hygiene that need further development. The priority area of Center functioning is scientific support for the implementation of the Doctrine of Food Security of the Russian Federation (Decree of the President of the Russian Federation dated January 21, 2020 No. 20), Decree of the President of the Russian Federation dated July 21, 2020 No. 474 «On the national development goals of the Russian Federation for the period until 2030 «in terms of ensuring an increase in life expectancy and improving the life quality of the population, the Strategy for Improving the Quality of Food Products in the Russian Federation until 2030 (Order of the Government of the Russian Federation dated June 29, 2016 No. 1364-r). The Center coordinates all research on medical nutrition problems in the Russian Federation within the framework of the work of the Problem Commission on Nutrition Hygiene of the Scientific Council of the Federal Service for Supervision of Consumer Rights Protection and Human Welfare, the Scientific Council of the Russian Academy of Sciences on Medical Nutrition Problems, the Scientific and Technical Committee of the Comprehensive Scientific Program «Priority Research in the Field of Nutrition of the Population¼, Profile Commission on Dietetics of the Expert Council in the Field of Health of the Ministry of Healthcare of Russian Federation, ensuring the implementation of their results with the participation of members of the Consortium "Healthcare, Nutrition, Demography". The most important area of the Center's work is scientific and expert support in the field of international and national technical regulation of the production and turnover of foods and raw materials, in particular, the work of the Russian national contact point of the Codex Alimentarius Commission (established by FAO and WHO), as well as the work of the Russian side in the Eurasian Economic Commission regarding the preparation of proposals for technical regulations of the Customs Union in the field of food safety, evaluation of draft technical regulations and amendments and additions to them.

The Knowledge and Practices Toward Food Safety Measures at Home in the Lebanese Community.

Hygienic measures practiced at home are highly related to the occurrence of food-borne diseases during food production, storage, and handling. Contaminated food remains a major cause of several diarrheal diseases, hospitalizations, and spikes in medical expenses. In our current study, we aimed to assess the knowledge of food safety and the food safety and hygiene practices at home among the Lebanese population. A cross-sectional study was conducted through an online questionnaire including two sections. The first section included socio-demographic characteristics of participants, whereas the second section included questions related to practices and knowledge about food safety, divided into five parts; personal hygiene practices, dry and cold storage, sanitizing and cleaning and food intoxication. A total of 1101 Lebanese above 18 years participated and provided their responses to the questionnaire. Overall, the majority of participants had fair knowledge about food safety where 96.8% of the participants answered correctly about preventing microbial growth on food. 77.9% of those participants acquired their knowledge about food safety from articles, workshops, or the internet. Moreover, females, people with children and those who cook for themselves scored significantly higher than others (68.8, 70.6, and 70%, respectively). In comparison to younger participants (67.8%), older participants (50+ and 30-49) scored higher at 69.7% and 68.9%, respectively. Higher scores were obtained for questions related to storing dried foods/meat and poultry products with percentages 91.4 and 87.8%, respectively. However, lower scores were noticed on questions related to washing raw chicken before handling and storing eggs (9.7 and 12.3%, respectively). Altogether, our results revealed the need for directed food safety awareness campaigns at the national level to educate the Lebanese community about domestic food handling practices. We believe these campaigns can significantly reduce related diseases and hospitalizations.

An explainable unsupervised risk early warning framework based on the empirical cumulative distribution function: Application to dairy safety.

Efficient food safety risk assessment significantly affects food safety supervision. However, food detection data of different types and batches show different feature distributions, resulting in unstable detection results of most risk assessment models, lack of interpretability of risk classification, and insufficient risk traceability. This study aims to explore an efficient food safety risk assessment model that takes into account robustness, interpretability and traceability. Therefore, the Explainable unsupervised risk Warning Framework based on the Empirical cumulative Distribution function (EWFED) was proposed. Firstly, the detection data's underlying distribution is estimated as non-parametric by calculating each testing indicator's empirical cumulative distribution. Next, the tail probabilities of each testing indicator are estimated based on these distributions and summarized to obtain the sample risk value. Finally, the "3σ Rule" is used to achieve explainable risk classification of qualified samples, and the reasons for unqualified samples are tracked according to the risk score of each testing indicator. The experiments of the EWFED model on two types of dairy product detection data in actual application scenarios have verified its effectiveness, achieving interpretable risk division and risk tracing of unqualified samples. Therefore, this study provides a more robust and systematic food safety risk assessment method to promote precise management and control of food safety risks effectively.

Knowledge, Attitude, and Practices on Food Safety among Food Handlers Working in Public Food Service Establishments in Lemi Kura Subcity, Addis Ababa, Ethiopia.

Foodborne diseases, resulting from poor food handling and sanitation practices, are common public health problems globally. The primary contributing factors to potential foodborne disease outbreaks are often attributed to the poor perception and practices of food handlers regarding food safety. This study is aimed at assessing the knowledge, attitude, and practices of food handlers working in public food service establishments in Lemi Kura subcity, Addis Ababa, Ethiopia. A cross-sectional study was conducted from December 2022 to September 2023, involving 400 food handlers from 20 randomly selected public food service establishments. Data were collected using a structured interview-administered questionnaire and an observational checklist. The collected data were entered into Microsoft Excel and then transferred to SPSS version 20 for analysis. Descriptive statistics were employed to summarize the data, and Pearson's chi-square test was used to evaluate the association of sociodemographic factors with the knowledge, attitude, and practices of food handlers towards food safety. Of the 400 food handlers, 65.5% had good knowledge about food safety. All food handlers were knowledgeable that washing hand before handling food will reduce risk of poisoning, bacteria are the main cause of food poisoning, and temperature plays a big role in bacterial growth. This study also revealed that 65.3% of the food handlers had good attitude towards food safety and 55.3% of food handlers had good food handling practice. Based on the observation, 38.5% of food handlers had good food handling practice. Taking training, age, and work experience of food handlers have statistically significant (P < 0.05) association with good attitude towards food safety. Additionally, taking training, educational level, employment, and work experience of food handlers have statistically significant (P < 0.05) association with good practice towards food safety. However, there was no statistically significant association between all sociodemographic factors and knowledge about food safety. Good knowledge and attitude were also associated with good food handling practices of the respondents. Based on the observation, there was a statistically significant association between employment status and good food handling practice. In conclusion, the findings suggest the necessity for implementing formal educational and training programs aimed at positively influencing the knowledge and attitude of food handlers, subsequently improving their food handling practices.

Nanotechnology-based analytical techniques for the detection of contaminants in aquatic products.

Food safety of aquatic products has attracted considerable attention worldwide. Although a series of conventional bioassays and instrumental methods have been developed for the detection of pathogenic bacteria, heavy metal residues, marine toxins, and biogenic amines during the production and storage of fish, shrimp, crabs et al., the nanotechnology-based analyses still have their advantages and are promising since they are cost-efficient, highly sensitive and selective, easy to conduct, facial design, often require no sophisticated instruments but with excellent detection performance. This review aims to summarize the advances of various biosensing strategies for bacteria, metal ions, and small molecule contaminants in aquatic products during the last five years, The review highlights the development in nanotechnologies applied for biorecognition process, signal transduction and amplification methods in each novel approach, the nuclease-mediated DNA amplification, nanomaterials (noble metal nanoparticle, metal-organic frameworks, carbon dots), lateral flow-based biosensor, surface-enhanced Raman scattering, microfluidic chip, and molecular imprinting technologies were especially emphasized. Moreover, this study provides a view of current accomplishments, challenges, and future development directions of nanotechnology in aquatic product safety evaluation.

Food safety knowledge and practices among food handlers and consumers in Gulf countries: An integrative review.

Foodborne illnesses result from inadequate food handling practices, but prevention is possible through implementing food safety principles by handlers and consumers. This paper presents an overview of food safety knowledge and practices among food handlers and consumers in the Gulf countries, identifies factors affecting knowledge and practice, and offers recommendations for promoting food safety among handlers and consumers. A literature search was conducted using an integrative review method. Various combinations of the following descriptors were used: (food safety, food hygiene), (knowledge, practice), and (Saudi Arabia, Qatar, UAE, Bahrain, Oman, and Kuwait). Out of 164 studies screened, 37 met the eligibility criteria. Food handler studies reported insufficient food safety knowledge, with poor translation of existing knowledge into practice. Consumer studies showed varying levels of food safety knowledge, and the translation of existing knowledge into practice was also found to be inconsistent. Training and educational level were the primary factors positively affecting food safety knowledge and practices. Overall, significant gaps in knowledge and practices were identified among food handlers and consumers in the Gulf. These gaps require urgent attention from the Gulf regulatory bodies to develop targeted food safety training and education programs to enhance awareness and implementation of food safety principles.

Cultivating Food Safety Together: Insights About the Future of Produce Safety in the U.S. Controlled Environment Agriculture Sector.

Controlled environment agriculture (CEA) is a rapidly growing sector that presents unique challenges and opportunities in ensuring food safety. This manuscript highlights critical gaps and needs to promote food safety in CEA systems as identified by stakeholders (n=47) at the Strategizing to Advance Future Extension andResearch (S.A.F.E.R.) CEA conference held in April 2023 at The Ohio State University's Ohio CEA Research Center. Feedback collected at the conference was analyzed using an emergent thematic analysis approach to determine key areas of focus. Research-based guidance is specific to the type of commodity, production system type, and size. Themes include the need for improved supply chain control, cleaning, and sanitization practices, pathogen preventive controls and mitigation methods and training and education. Discussions surrounding supply chain control underscored the significance of the need for approaches to mitigate foodborne pathogen contamination. Effective cleaning and sanitization practices are vital to maintaining a safe production environment, with considerations such as establishing standard operating procedures, accounting for hygienic equipment design, and managing the microbial communities within the system. Data analysis further highlights the need for risk assessments, validated pathogen detection methods, and evidence-based guidance in microbial reduction. In addition, training and education were identified as crucial in promoting a culture of food safety within CEA. The development of partnerships between industry, regulatory, and research institutions are needed to advance data-driven guidance and practices across the diverse range of CEA operations and deemed essential for addressing challenges and advancing food safety practices in CEA. Considering these factors, the CEA industry can enhance food safety practices, foster consumer trust, and support its long-term sustainability.

Salmonella detection with LAMP and qPCR and identification of serovars of interest by multiplex qPCR in poultry carcasses.

Salmonella is present in the poultry production chain and is a major challenge in terms of food safety and animal health. The early Salmonella detection is one of the main tools to control and prevent the transmission of this pathogen. Microbiological isolation and serotyping to identify and differentiate Salmonella serovars are laborious processes, time-consuming, and expensive. Therefore, molecular diagnostic methods can be rapid and efficient alternatives to the detection of this pathogen. Thus, the aim herein was to standardize and evaluate the use of loop-mediated isothermal amplification (LAMP) in comparison with real-time PCR (qPCR) for detection of Salmonella associated with a multiplex qPCR for simultaneous identification and differentiation of S. Enteritidis, S. Typhimurium, S. Pullorum, and S. Gallinarum. The LAMP, qPCR, and multiplex qPCR assays were comparable in specificity. The three techniques were evaluated for specificity for 16 different serovars of Salmonella and for 37 strains of the serovars of interest. The limit of detection and the efficiency of the LAMP, qPCR, and multiplex qPCR reactions were determined. The techniques were applied to 33 samples of chicken carcasses and compared to the results of conventional microbiology for validation. As results, LAMP was specific in the detection of different Salmonella serovars but presented lower limit of detection ranging from 101 to 104 CFU/reaction. In comparison, qPCR could detect less cells (100 to 102 CFU/reaction), reaching equal specificity and better repeatability in the assays. The qPCR multiplexing for identification of the different serovars also showed good specificity, with the detection threshold between entre 101 and 102 CFU/reaction. The results obtained in the analyses on poultry carcasses suggested a correspondence between the results obtained in molecular methods and in conventional microbiology. Thus, the proposed assays are promising for the diagnosis of Salmonella in poultry carcasses, already proved to be faster and more efficient than conventional diagnostics techniques, being of great interest for poultry production, animal, and public health.

Food safety knowledge, attitudes, and practices among Jordanian women handling food at home during COVID-19 pandemic.

Concerns over food safety issues during the coronavirus pandemic (COVID-19) have sparked worldwide interest. Being part of a farm-to-fork food safety chain, food handlers at home are the final line of defense in reducing foodborne diseases. The present study used a cross-sectional survey to investigate the knowledge, attitudes, and practices (KAP) of women food handlers in Jordan. The survey investigated the effect of the COVID-19 pandemic on women who handle food at home in terms of food safety KAP. One thousand one hundred twenty-six respondents completed a food safety questionnaire during the COVID-19 pandemic. With a mean score of 22.1 points out of 42, the results showed that women who handle food in their houses had insufficient knowledge, negative attitudes, and incorrect practices concerning food safety. The respondents demonstrated high knowledge, attitudes, and practices in the personal hygiene, cleaning and sanitation areas (≥ 60.0%). On the other hand, participants' knowledge, attitudes, and practices regarding contamination prevention, health issues that would affect food safety, symptoms of foodborne illnesses, safe storage, thawing, cooking, keeping, and reheating of foods, as well as COVID-19 were all low (< 60.0%). The correlations between participants' total food safety KAP scores and education, age, experience, region, and the pandemic effect on food safety were statistically significant (P ≤ 0.05). To the best of our knowledge, this study is the first conducted in Jordan to investigate food safety knowledge, attitudes, and practices by women handling food at home during the COVID-19 pandemic.

Bacteriophage Delivery Systems for Food Applications: Opportunities and Perspectives.

Currently, one-third of all food produced worldwide is wasted or lost, and bacterial contamination is one of the main reasons. Moreover, foodborne diseases are a severe problem, causing more than 420,000 deaths and nearly 600 million illnesses yearly, demanding more attention to food safety. Thus, new solutions need to be explored to tackle these problems. A possible solution for bacterial contamination is using bacteriophages (phages), which are harmless to humans; these natural viruses can be used to prevent or reduce food contamination by foodborne pathogens. In this regard, several studies showed the effectiveness of phages against bacteria. However, when used in their free form, phages can lose infectivity, decreasing the application in foods. To overcome this problem, new delivery systems are being studied to incorporate phages and ensure prolonged activity and controlled release in food systems. This review focuses on the existent and new phage delivery systems applied in the food industry to promote food safety. Initially, an overview of phages, their main advantages, and challenges is presented, followed by the different delivery systems, focused in methodologies, and biomaterials that can be used. In the end, examples of phage applications in foods are disclosed and future perspectives are approached.

Food handlers' knowledge, attitudes and self-reported practices regarding safe food handling in charitable food assistance programmes in the eThekwini District, South Africa: cross-sectional study.

OBJECTIVE: This study aimed to assess food handlers' knowledge, attitudes and self-reported practices towards safer donated foods. DESIGN: This cross-sectional study was conducted from January to May 2021. SETTING: This study was conducted in the eThekwini District, South Africa. PARTICIPANTS: A convenience sampling-based cross-sectional survey of food handlers (n=252) served as the study's main source of data. A total of eight study sites across five municipal planning regions of eThekwini District were visited. The principal investigator administered the validated structured standardised questionnaire, using participants' language of choice, which was either English or isiZulu. All the questions in the questionnaire were asked in exactly the same manner, following the same flow, in order to avoid bias and ensure consistency. Furthermore, the close-ended nature of questions in the questionnaire mitigated the risks of question manipulation. The questionnaire was adapted from the WHO's five keys to a safer food manual. PRIMARY AND SECONDARY OUTCOME MEASURES: The primary outcome was the knowledge, attitudes and self-reported practices towards safer donated foods. The secondary outcomes were the sanitary conditions of infrastructure and facilities, food handlers' observed food handling behaviour and nutritional information/labelling. RESULTS: The results show that the food handlers had good knowledge, positive attitude and acceptable behaviours towards safe food handling and general hygiene, with mean scores (SD) of 62.8 (14.6), 92.5 (14.1) and 80.4 (13.3), respectively. Significant correlations were found between knowledge and attitudes (p=0001), knowledge and practices (p<0001), and attitudes and practices (p=0.02). However, the correlations between knowledge versus attitude and attitude versus practice were poor (Spearman's r<0.3), and the association between knowledge versus practice was moderate (0.3-0.7). The majority of food handlers (92.5%) did not understand the value of thorough cooking and temperature control. About 53% of respondents acknowledged to never adequately reheating cooked meals, 5% did not see the significance of preventing cross-contamination and 5% were unsure. CONCLUSIONS: Despite the relatively positive knowledge, attitude and practice levels of the food handlers, safe food handling and hygiene practices, such as thorough cooking and temperature control, properly reheating cooked meals and taking precautions to prevent cross-contamination, require some emphasis.

Leafy Green Farm-to-Customer Process Model Predicts Product Testing Is Most Effective at Detecting Contamination When Conducted Early in the System before Effective Interventions.

Commercial leafy green supply chains often are required to have test and reject (sampling) plans for specific microbial adulterants at primary production or finished product packing for market access. To better understand the impact of this type of sampling, this study simulated the effect of sampling (from preharvest to consumer) and processing interventions (such as produce wash with antimicrobial chemistry) on the microbial adulterant load reaching the system endpoint (customer). This study simulated seven leafy green systems, an optimal system (all interventions), a suboptimal system (no interventions), and five systems where single interventions were removed to represent single process failures, resulting in 147 total scenarios. The all-interventions scenario resulted in a 3.4 log reduction (95% confidence interval [CI], 3.3 to 3.6) of the total adulterant cells that reached the system endpoint (endpoint TACs). The most effective single interventions were washing, prewashing, and preharvest holding, 1.3 (95% CI, 1.2 to 1.5), 1.3 (95% CI, 1.2 to 1.4), and 0.80 (95% CI, 0.73 to 0.90) log reduction to endpoint TACs, respectively. The factor sensitivity analysis suggests that sampling plans that happen before effective processing interventions (preharvest, harvest, and receiving) were most effective at reducing endpoint TACs, ranging between 0.05 and 0.66 log additional reduction compared to systems with no sampling. In contrast, sampling postprocessing (finished product) did not provide meaningful additional reductions to the endpoint TACs (0 to 0.04 log reduction). The model suggests that sampling used to detect contamination was most effective earlier in the system before effective interventions. Effective interventions reduce undetected contamination levels and prevalence, reducing a sampling plan's ability to detect contamination. IMPORTANCE This study addresses the industry and academic need to understand the effect of test-and-reject sampling within a farm-to-customer food safety system. The model developed looks at product sampling beyond the preharvest stage by assessing sampling at multiple stages. This study shows that individual interventions and combined interventions substantially reduce the total adulterant cells reaching the system endpoint. When effective interventions occur during processing, sampling at earlier stages (preharvest, harvest, receiving) has more power to detect incoming contamination than postprocessing sampling, as prevalence and contamination levels are lower. This study reiterates that effective food safety interventions are crucial for food safety. When product sampling is used to test and reject a lot as a preventive control, it may detect critically high incoming contamination. However, if contamination levels and prevalence are low, typical sampling plans will fail to detect contamination.

The application of adaptively evolved thermostable bacteriophage ΦYMFM0293 to control Salmonella spp. in poultry skin.

Bacteriophages, bacterial viruses, are now being re-highlighted as one of the promising alternative antimicrobial agents to control bacterial pathogens in various fields, including the food industry. However, wild-type (WT) phages isolated from nature are vulnerable to external stresses such as heat, limiting the usability of phages in thermal processing. Here, we applied an adaptive laboratory evolution approach to improving the heat stability of newly isolated Salmonella-infecting lytic phage ΦYMFM0293 and examined its application in the poultry scalding process. After 15 cycles of exposure to sub-lethal temperature, the obtained adaptively evolved (AE) phages maintained approximately 3-log more infectious particles at 73 or 74 °C than the WT and non-heat-treated control phages. Missense mutations mainly concentrated in the genes related to the phage tail module were identified from the independently obtained heat-challenged phages, regardless of host Salmonella's heat-shock protein chaperone induction. These results demonstrated the necessity and sufficiency of the phage exposures to heat for thermal adaptation and suggested the involvement of the phage tail in heat stability. No significant physiological or morphological changes except the mutually offsetting phage replication parameters were observed in the AE phages. Accordingly, hot water supplemented with the AE phages significantly reduced the number of artificially contaminated Salmonella cells on chicken and duck skin in the mimicked scalding process. The AE strategy used here could be applied to other WT phages to improve their usability as more feasible antimicrobials for food safety.

Focus on histamine production during cheese manufacture and processing: A review.

Histamine (HIS) intoxication is a poisoning caused by histamine in food. Cheese is one of the most common dairy products associated with histamine levels which vary depending on the processing methods. The final content of histamine in cheese is influenced by intrinsic and extrinsic factors, their interactions, and contamination stemming from food processing. The application of control measures may be useful to inhibit/reduce production during cheese manufacture and processing but have a limited effect. To reduce histamine intoxication outbreaks from cheese consumption the introduction of quality control programs and appropriate risk mitigation options should be applied along the dairy chain from an overall perspective of food safety based on individual susceptibility and consumer sensitivity. As key food safety, this topic should be considered in future regulations in dairy products because the lack of a clear law on HIS limits in cheese may result in a significant potential deviation from the EU food safety strategy.

Risk Assessment of Combined Exposure to Multiple Chemicals at the European Food Safety Authority: Principles, Guidance Documents, Applications and Future Challenges.

Human health and animal health risk assessment of combined exposure to multiple chemicals use the same steps as single-substance risk assessment, namely problem formulation, exposure assessment, hazard assessment and risk characterisation. The main unique feature of combined RA is the assessment of combined exposure, toxicity and risk. Recently, the Scientific Committee of the European Food Safety Authority (EFSA) published two relevant guidance documents. The first one "Harmonised methodologies for the human health, animal health and ecological risk assessment of combined exposure to multiple chemicals" provides principles and explores methodologies for all steps of risk assessment together with a reporting table. This guidance supports also the default assumption that dose addition is applied for combined toxicity of the chemicals unless evidence for response addition or interactions (antagonism or synergism) is available. The second guidance document provides an account of the scientific criteria to group chemicals in assessment groups using hazard-driven criteria and prioritisation methods, i.e., exposure-driven and risk-based approaches. This manuscript describes such principles, provides a brief description of EFSA's guidance documents, examples of applications in the human health and animal health area and concludes with a discussion on future challenges in this field.

Fluorescent noble metal nanoclusters for contaminants analysis in food matrix.

Recently, food safety issues caused by contaminants have aroused great public concern. The development of innovative and efficient sensing techniques for contaminants detection in food matrix is in urgent demand. As fluorescent nanomaterials, noble metal nanoclusters have attracted much attention because of their ease of synthesis, enhanced catalytic activity and biocompatibility, and most importantly, excellent photoluminescence property that provides promising analytical applications. This review comprehensively introduced the synthesis method of noble metal nanoclusters, and summarized the application of metal nanoclusters as fluorescent sensing materials in the detection of pollutants, including pesticides, heavy metal, mycotoxin, food additives, and other contaminants in food. The detection mechanism of pesticide residues mostly relies on the inhibition of natural enzymes. For heavy metals, the detection mechanism is mainly related to the interaction between metal ions and nanoclusters or ligands. It is evidenced that metal nanoclusters have great potential application in the field of food safety monitoring. Moreover, challenges and future trends of nanoclusters were discussed. We hope that this review can provide insights and directions for the application of nanoclusters in contaminants detection.

Metrological traceability in process analytical technologies and point-of-need technologies for food safety and quality control: not a straightforward issue.

Traditional techniques for food analysis are based on off-line laboratory methods that are expensive and time-consuming and often require qualified personnel. Despite the high standards of accuracy and metrological traceability, these well-established methods do not facilitate real-time process monitoring and timely on-site decision-making as required for food safety and quality control. The future of food testing includes rapid, cost-effective, portable, and simple methods for both qualitative screening and quantification of food contaminants, as well as continuous, real-time measurement in production lines. Process automatization through process analytical technologies (PAT) is an increasing trend in the food industry as a way to achieve improved product quality, safety, and consistency, reduced production cycle times, minimal product waste or reworks, and the possibility for real-time product release. Novel methods of analysis for point-of-need (PON) screening could greatly improve food testing by allowing non-experts, such as consumers, to test in situ food products using portable instruments, smartphones, or even visual naked-eye inspections, or farmers and small producers to monitor products in the field. This requires the attention of the research community and devices manufacturers to ensure reliability of measurement results from PAT strategy and PON tests through the demonstration and critical evaluation of performance characteristics. The fitness for purpose of methods in real-life conditions is a priority that should not be overlooked in order to maintain an effective and harmonized food safety policy.

Exploring the Inhibitory Effect of RASFF on China-EU Trade of Rice-Based Products.

Rice-based products exported from China to Europe have repeatedly encountered technical trade barriers. Using panel data from 24 states of the European Union during 2001-2017, this study builds a theoretical model to investigate the impact of implementation, intensity and structure of the Rapid Alert System for Food and Feed (RASFF) on China-EU rice-based product trade. The study found that RASFF has a serious inhibitory effect on the trade of traditional rice-based products because of detecting GM ingredients, showing an obvious lag effect, diffusion effect and structure effect. The negative effect occurs in entry process, and the inhibitory effect of border rejection and information notifications results in time lag, but the marginal effect of alerts for market links is insignificant. Moreover, the positive information disclosure effect of technical barriers implemented by individual members is much smaller than the negative diffusion effect. Finally, countermeasures and suggestions are proposed, including the source supervision of the test, the supervision of GM variety approval and GM seed production, the establishment of an early-warning and rapid-response mechanism to technical barriers of agricultural products, and food enterprise information.

Research on traceability strategy of food supply chain considering delay effect.

The traceability system has significantly contributed to ensure food safety and quality. However, the biggest difficulty in food traceability is the numerous links from field to table, and there is no stable strategic partnership between supply chain members and the lack of social responsibility of some practitioners. Thus, this study aims to seek the best traceability strategy for companies in centralized model and decentralized model, respectively. Therefore, we have constructed a differential game model based on the delay effect to determine the optimal traceability level and traceable goodwill and compare the profits of the food supply chain (FSC). The results show that the delay time is positively related to the level of traceability effort and has a high impact on the traceable goodwill. Companies in the FSC can formulate optimal traceability strategies based on delay time and foster improvement in food safety and quality.